Shanghai Laser & Optics Century Co., Ltd. (SLOC) | Laser | Manufacturer of DPSS Green Laser, Blue Laser, Red Laser, Yellow Laser, Infrared Laser, UV Laser | 635nm and 650nm Laser Modules | Laser Diode | Scanner, Line Lens, Combiner, Beamsplitter, Filter, Rod Lens, Ball Lens | Fiber Coupled, RGB Laser, Low Noise, SLM, Line Laser, Laser Pointer, Portable Laser

808nm Infrared Diode Laser with Fiber Coupler (TA-FC)

Key Feature

Application

Optical Parameter
Output Wavelength		808±5nm
Laser Diode		Multi Transverse Mode
Spectral Width (FWHM)		2nm
Output Power after Coupler		>500mW, 1000mW, 2000mW, 3000mW, 5000mW, 6000mW
FDA Safety Class		Class IV
Operating Mode		CW
Beam Focus to		<200μm
Fiber Connector		FC/PC, FC/APC, SMA905
Fiber can be Attached		200μm, 400μm, 600μm MM fiber
Power Stability		1% or 3% (rms, over 2 hours, T= 25℃)
Optical Noise		1% (rms, 20Hz~20MHz)
Electrical Parameter
Power Supply		ADR-180A
		Adjustable Power Supply, with LED Display
Input Voltage		85~240VAC, 50/60Hz
Modulation		TTL or Analog Modulation
Mechanical Parameter
Dimensions of Laser Head		140 × 49 × 42mm
Weight of Laser Head		0.6Kg
Dimensions of Power Supply		150 × 110 × 56mm
Weight of Power Supply		0.6Kg
Reliability
Warm Up Time		<10 minutes
Cooling		TEC, Forced-air cooled
Operating Temperature, Case		10℃ ~ 35℃
Storage Temperature		-20℃ ~ 60℃
Expected Operation Lifetime		10000 hours
Warranty		12 months
Note
» The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 2-Year Warranty is available upon request.

Laser Head, TA with Fiber Coupler


ADR-180A Power Supply