532nm Green DPSS Laser Module (Φ12mm) |
|
![]() |
Key Feature
|
| Optical Parameter | |||
| Output Wavelength | 532±1nm | ||
| Output Power | <1mW | <5mW | 10mW, 20mW |
| Laser Class | Class II | Class IIIa | Class IIIb |
| Operating Mode | CW | ||
| Transverse Mode | TEM00 | ||
| Beam Divergence, Full Angle | 1.2mrad | ||
| Beam Diameter (1/e2) @ Exit | 1.5mm | ||
| Power Stability | 5% (rms, over 2 hours, T= 25℃) | ||
| IR Filter | Yes | ||
| Power | |||
| PCB Driver | Built-in | ||
| Circuit Board Exposure | None. Case Enclosed | ||
| Circuit Type | APC | ||
| Operating Voltage | 3VDC | ||
| Operating Current | <400mA | ||
| Circuit Polarity | Case Positive | ||
| Electrical Connections | 100mm leads, red / black | ||
| Mechanical Parameter | |||
| Dimensions of Laser Head | Φ12 × 31.3mm (without circuit) | ||
| Housing / Case Material | Brass | ||
| Weight | 30g | ||
| Reliability | |||
| Warm Up Time | 3 seconds | ||
| Cooling | Forced-air cooled | ||
| Operating Temperature, Case | 20℃ ~ 30℃ (Standard) | ||
| Storage Temperature | -20℃ ~ 60℃ | ||
| Expected Operation Lifetime | 5000 hours | ||
| Warranty | 6 months | ||
| Note | |||
| » Additional heat sink or cooling fan may be needed to stabilize the output power of laser module. | |||
| Laser Products | |||||
| Model | Output Power | Diameter | Operating Temperature | Circuit | CDRH Laser Class |
| GL12-532D-01 | <1mW | Φ12mm | 20℃ ~ 30℃ | APC | Class 2/II |
| GL12-532D-05 | <5mW | Φ12mm | 20℃ ~ 30℃ | APC | Class 3R/IIIa |
| GL12-532D-10 | 10mW | Φ12mm | 20℃ ~ 30℃ | APC | Class 3B/IIIb |
| GL12-532D-20 | 20mW | Φ12mm | 20℃ ~ 30℃ | APC | Class 3B/IIIb |
| Mechanical Drawing | ||
![]() |
||
| Laser Module | ||
|
|
|