| Optical Parameter | |||||
| Output Wavelength | 532±1nm | ||||
| Output Power | 300mW, <500mW | 1000mW, 1500mW | |||
| FDA Laser Class | Class IIIb | Class IV | |||
| Operating Mode | CW | ||||
| Transverse Mode | TEM00 | ||||
| Longitudinal Modes | Multiple | ||||
| Mode Quality (M2) | <1.2 | ||||
| Beam Divergence, Full Angle | <1.5mrad | ||||
| Beam Diameter (1/e2) @ Exit | ~2.0mm | ||||
| Power Stability | <1% or <3% (rms, over 2 hours, T= 25℃) | ||||
| Beam Pointing Stability | <50μrad (after warm-up, 2 hours, T= 25℃) | ||||
| Polarization, Linear | >100:1 | ||||
| Residual IR | <0.1% | ||||
| Electrical Parameter | |||||
| Power Supply | ADR-800A | ADR-800D | |||
| Adjustable Power Supply | FDA Power Supply | ||||
| Input Voltage | 85~240VAC, 50/60Hz | ||||
| Modulation | TTL on/off (≤100Hz) | ||||
| Mechanical Parameter | |||||
| Dimensions of Laser Head | 207 × 70 × 50mm | ||||
| Weight of Laser Head | 2.0Kg | ||||
| Dimensions of Power Supply | 277 × 145 × 106mm | 275 × 145 × 104mm | |||
| Weight of Power Supply | 2.6Kg | 2.3Kg | |||
| Reliability | |||||
| Warm Up Time | <10 minutes | ||||
| Cooling | TEC, Forced-air cooled | ||||
| Operating Temperature, Case | 10℃ ~ 35℃ | ||||
| Storage Temperature | -20℃ ~ 60℃ | ||||
| Expected Operation Lifetime | 10000 hours | ||||
| Warranty | 12 months | ||||
| Note | |||||
| » The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. » All specifications are based on performance at full output power and after the specified warmup period. Output characteristics may change if the laser is run at a different power level. » 1KHz TTL modulation, 10KHz TTL modulation, 30KHz TTL modulation and 2KHz Analog Modulation are available upon request. » 2-Year Warranty is available upon request. |
|||||
| Accessories (optional) | ||
| Laser Products | ||||
| Model | Output Power | Power Stability (2hrs, 25℃) | Modulation | IEC/CDRH Laser Class |
| GL532T8-300 | 300mW | <3% rms | TTL on/off | Class 3B/IIIb |
| GL532T8-500 | <500mW | <3% rms | TTL on/off | Class 3B/IIIb |
| GL532T8-1000 | 1000mW | <3% rms | TTL on/off | Class 4/IV |
| GL532T8-1500 | 1500mW | <3% rms | TTL on/off | Class 4/IV |
| GL532T8U-300 | 300mW | <1% rms | TTL on/off | Class 3B/IIIb |
| GL532T8U-500 | <500mW | <1% rms | TTL on/off | Class 3B/IIIb |
| GL532T8U-1000 | 1000mW | <1% rms | TTL on/off | Class 4/IV |
| GL532T8U-1500 | 1500mW | <1% rms | TTL on/off | Class 4/IV |
| Mechanical Drawing | ||
![]() |
![]() |
![]() |
| ADR-800A Power Supply | ||
|
|
|
| ADR-800D Power Supply | ||
|
|
|
| Laser | ||
|
|
|